YOUR PAGE, YOUR WAY

Make a little space

Ready-made A4 PDF

Print at Actual size / 100% with browser headers and footers turned off. Only whole systems that fit are drawn; reduce the system count or spacing if you need more room.

Your files stay on your device. Free to use, without an account.
EXAMPLES, INSTRUCTIONS AND ANSWERS

Write guitar riffs with clear string, fret and rhythm choices

THE SHORT ANSWER

Print six-line guitar tablature for riffs, fingerings and practice patterns you want to keep. The top line is the high E string; fret numbers go directly on their string lines. Add your own timing and technique instructions, then use the adjustable preview to make a readable PDF or SVG.

Printed layout
Six lines per system with a tuning reminder
Top to bottom
High e, B, G, D, A, low E
Starting settings
8 systems, Standard spacing, A4
Blank on purpose
No preset frets, rhythm or bar lines

Start in three steps

  1. 01

    Choose room for numbers

    Use larger spacing for two-digit frets, string-change notes or technique annotations.

  2. 02

    Save the current template

    Choose A4 or Letter, set your title and download the preview as PDF.

  3. 03

    Check the orientation

    Print a test and locate the high E top line before writing a riff.

Understand the six strings on the page

In standard six-string tablature, the top line represents the highest-pitched string, high E, and the bottom line represents low E. From top to bottom the usual tuning is e, B, G, D, A, E. This can feel reversed when you look down at a guitar, so check the printed tuning reminder before writing your first number.

A number on a line names a fret on that string. Zero means the open string; three means the third fret. Numbers aligned vertically form notes intended to start together, while numbers moving left to right show a sequence. The lines communicate where to play. They do not automatically tell a reader how long each note lasts, so a useful tab also needs a clear rhythmic plan.

Write a small riff that another player can follow

Start with one string and one bar. In 4/4, try four even quarter-note attacks on the high E string using frets 0, 1, 3 and 1. Write the numbers on the top line, space them evenly, and add beat numbers above if the rhythm is not already obvious. Play the bar slowly and check that the order matches the printed string orientation.

Next, place a note on a neighbouring string. For example, after the open high E, write the third fret on the B string. Notice that a pitch may have more than one playable location on the guitar. Choose the fingering that suits the musical phrase, and keep it consistent unless a change is intentional. Tablature is valuable precisely because it can preserve those choices.

One original 4/4 bar, all on the high E string
BeatFret on top lineSounding pitch in standard tuning
10 — open stringE4
21F4
33G4
41F4

Expected result: E, F, G, F as four equal quarter-note attacks. The numbers specify frets, so write the equal-duration instruction above the bar.

Give rhythm and technique enough information

Plain fret numbers can be ambiguous. Mark the meter, write bar lines, and show the rhythm with counts, stems or an accompanying explanation. If every note is intended to be the same duration, state that clearly. If the pattern includes silence, indicate the rest rather than leaving a gap whose length the reader must guess.

Guitar techniques also need context. A slide, hammer-on, pull-off or bend should use a consistent mark and a short legend when the audience may not know it. A bend number alone can be unclear about its target pitch. This blank layout does not provide a technique palette or validate a notation system; you supply the information that makes the performance instruction precise.

Turn the page into a focused practice plan

For a lesson, use one system for an example and one for the learner to write a response. Ask them to play a short pattern, identify the strings used, and then notate it. Comparing the played phrase with the written tab can reveal a string-orientation mistake immediately. Begin with open strings and a few frets before adding fast movement or several simultaneous notes.

For personal practice, label each pattern with a tempo and a small goal, such as clean string changes or even alternate picking. Leave a place to record a comfortable tempo rather than treating the fastest attempt as the only result. If timing is the main difficulty, use the metronome and count aloud. The printed sheet should help organise deliberate practice, not simply collect disconnected fret sequences.

Choose a readable physical layout

Select A4 or US Letter before printing. Adjust the requested system count and staff spacing to suit the size of your fret numbers and annotations. Large numbers may need wider spacing, especially if you write two-digit frets or technique marks. The generator draws only whole systems that fit, so the preview may show fewer than a very high requested count.

Download PDF for a print-ready copy, or SVG for a scalable image. In the printer dialog, turn off browser headers and footers, choose the matching paper size and inspect the first and last systems. Actual size or 100% preserves the intended layout when the printer supports it. Print a test sheet before a group lesson to check that all six lines and handwritten numbers will remain easy to distinguish.

Know when tab needs a second representation

Tab is helpful when string and fret choices matter, but standard notation communicates pitch and rhythm more directly across instruments. A combined staff-and-tab page is a useful next step when you want to connect the two systems. Write the same musical event vertically in both, then compare the information each adds.

This printable does not listen to audio, identify chords or convert a song into tab. It also does not change automatically for alternate tuning, a capo, seven-string guitar or ukulele. Write those conditions clearly when adapting the sheet. The original template is free for personal practice, lessons and classroom handouts. Permission to use the paper does not grant permission to reproduce a protected song or someone else’s arrangement.

Guitar Tab Paper: frequently asked questions

Which E string is the top line?

The top line is the thin, high-pitched E string in standard tuning. The lowest line is the low E string. The printed reminder lists e B G D A E from top to bottom. Check this orientation before copying a pattern from the instrument to paper.

Can I use the page with a capo or alternate tuning?

You can adapt it by writing the capo position and tuning clearly at the start. The six lines remain a blank layout, and the page does not calculate resulting pitches. State whether fret numbers are counted from the capo so another player does not need to guess.

Does a number tell me the note duration?

No. A fret number specifies a position on a string. Duration needs additional notation, counting marks or a clear instruction. If rhythm is important to the exercise, consider the combined staff-and-tab printable or add an explicit rhythmic line above the tab.