Print at Actual size / 100% with browser headers and footers turned off. Only whole systems that fit are drawn; reduce the system count or spacing if you need more room.
Capture a four-string bass groove without reversing the strings
Print four-line tablature for bass grooves, string crossings and fingering exercises. The top line is G and the bottom line is E in standard tuning. Add fret numbers and a clear rhythm by hand, then save a page sized for your printer and writing style.
- Printed layout
- Four tab lines with a tuning reminder
- Top to bottom
- G, D, A, E in standard tuning
- Starting settings
- 9 systems, Standard spacing, A4
- Instrument format
- Four-string layout; no extra low-B line
Start in three steps
- 01
Leave space for the groove
Choose a title and spacing that accommodates fret numbers, counts and muting instructions.
- 02
Export for your paper tray
Match A4 or Letter and use Download PDF for the current preview.
- 03
Test the four lines
Print at Actual size and check the G-to-E reminder before notating a part.
Read the string order before writing numbers
For a standard four-string bass, the tab lines from top to bottom represent G, D, A and E. The top line is the highest-pitched string, even though it may not be the string closest to your face when you look down at the instrument. The tuning reminder on each system helps prevent that common reversal.
A number identifies a fret on the chosen string. Zero is the open string, and five is the fifth fret. A sequence of numbers moves through time from left to right. Numbers aligned vertically describe simultaneous attacks. Four lines suit a four-string instrument; this layout does not add a low B for a five-string bass or automatically relabel itself when you use a different tuning.
| Tab line from top | String name | Open sounding pitch |
|---|---|---|
| 1 — top | G | G2 |
| 2 | D | D2 |
| 3 | A | A1 |
| 4 — bottom | E | E1 |
Learner check: write 0 on the bottom line, then 3 on that same line. The result sounds E1 followed by G1, rather than the open top-string G2.
Capture one bar of a groove accurately
Start with a bar of 4/4 using four even quarter notes. Write fret 3 on the A string for sounding C2, fret 3 on the E string for G1, fret 5 on the E string for A1, and fret 3 on the A string for C2 again. Space the attacks evenly and write the counts above. Play the pattern slowly to verify both the string choices and the timing.
Then change only the rhythm. Hold the first C for two beats and place G and C on beats three and four. The fret numbers have changed little, but the feel has changed substantially. That difference shows why a useful tab cannot rely on pitch positions alone. Use counts, rhythmic stems or a clearly stated rhythmic pattern to preserve the idea you intend.
Write the space between the notes too
A groove is shaped by note endings and silence as well as by attacks. Leave an explicit rest or a clear duration indication when the bass stops sounding. A gap between fret numbers can mean several different things to another player, especially if the page is read without a recording. State the meter and tempo near the beginning of the exercise.
If a technique matters, define its mark. A slide, hammer-on, muted note or held tone should not depend on the reader guessing your personal shorthand. For a lesson, demonstrate the movement and then ask the learner to explain the notation back to you. This provides a useful check that the page communicates the same instruction to both people.
Use tab to organise deliberate practice
Choose a short pattern that targets one skill, such as clean string changes or a shift between two hand positions. Write a comfortable starting tempo beside it, then use the metronome. Listen for even attacks and controlled note endings. Increase the tempo only when you can repeat the pattern without losing those details.
Teachers can use paired systems for a model and a learner’s response. Another task is to play a short original phrase and ask the learner to write its string and fret choices. Compare the tab with the actual fingering, then discuss an alternative position for the same pitches. The purpose is to connect listening, movement and representation rather than collecting pages of unexamined numbers.
Set up a page that stays readable on the stand
The title can identify a groove, lesson or technique. Use standard spacing for ordinary fret numbers and larger spacing if you need two-digit frets or written counts around the lines. The system-count control requests a layout, but only complete systems that fit are drawn. Choose fewer rows if the writing begins to look crowded.
Select A4 or US Letter to match your paper tray, then download PDF or use the browser’s Print command. Turn off extra headers and footers, inspect the margins and choose Actual size or 100% when possible. Print a single test before copying a class set. The SVG download is available for a scalable version in your own document, where its final printed size still needs checking.
Choose tab when fingering is the information you need
Tab makes physical positions explicit, which is useful for a bass-specific exercise. Standard notation is better at communicating pitch and rhythm across instruments. If you want another musician to understand the line without knowing your fretboard, consider writing a bass-clef version as well. Comparing the two can also strengthen your own note reading.
This blank resource cannot listen to a recording, generate a bass arrangement or check your fretting technique. It is designed for four-string notation that you complete yourself. Original templates may be printed and adapted for personal practice, lessons and classroom handouts under the site’s terms. Music written on them may have separate rights, so use your own work or material you have permission to reproduce.
Bass Guitar Tab Paper: frequently asked questions
Can I use this with a five-string bass?
The supplied layout contains four lines for G, D, A and E. A five-string instrument usually needs an additional line and a clearly stated tuning. Do not place a low-B note on an existing line without explaining a different system; that would make the tab ambiguous.
Does zero mean a rest?
No. Zero means an open string, which is a sounding note. A rest means silence and needs a separate rhythmic mark or explicit instruction. This distinction is important in bass grooves because the duration of a note and the silence after it strongly affect the feel.
How do I keep the same layout for another lesson?
Download the PDF or SVG after choosing the title and page settings. You can print that file again without recreating the page. Keep a blank master for repeated use, and use a new title when you want to distinguish a different practice pattern or lesson.