Opening your workspace…
Convert a MIDI melody into readable sheet music
Open a MIDI file and turn one pitched track into a single-voice notation draft. Choose a quarter-, eighth- or sixteenth-note grid, build the score and compare the result with the source. This guide shows how to choose a track, recognise quantization errors and save an editable result. Conversion runs in your browser, with no upload, payment or account.
- Input
- .mid or .midi, up to 5 MB; no audio recordings
- Supported material
- Pitched tracks up to 2,000 notes; pitches C1–B7
- Voice handling
- One melody; highest pitch retained at a shared quantized onset
- Outputs
- MusicXML, editable project JSON and Print / PDF
Start in three steps
- 01
Open and isolate the melody
Load a MIDI file and select the pitched track containing the musical line you need
- 02
Build and compare
Choose a rhythm grid, build the preview and check a familiar measure by ear
- 03
Export for correction
Save MusicXML or an editable project after reviewing rests, overlaps and split notes
Check MIDI format, size and note limits
Choose a .mid or .midi file smaller than 5 MB. A clean melody exported from a sequencer is an easier starting point than a dense performance containing many overlapping parts. The tool reads pitched tracks locally and leaves percussion tracks out of the melody choices. A percussion-only file therefore has no supported melodic track to convert.
The current import checks require pitched tracks with no more than 2,000 source notes. Supported pitches run from C1 through B7, with positive note durations. If a file is rejected, make a shorter export or isolate a small melodic part in the source program. Changing an MP3 filename to .mid does not turn audio into MIDI data.
Choose a pitched melody track
After opening a file, select the track you actually want to read. Track names can help, but they are not proof of musical content; a track called Piano might contain an accompaniment rather than the tune. Preview a short passage you recognise and compare its direction with your source. A single-note instrumental line is the intended use.
This converter makes one melodic voice. When several notes land at the same quantized onset, it keeps the highest note. Other overlapping events may also be simplified. That behaviour can reveal a top-line melody, but it does not preserve a complete chord voicing, two-hand piano texture or separate contrapuntal voices. The result is a draft to review, not a full arrangement.
Choose the quantization grid for your rhythm
Quantization rounds performed starts and durations to a notation grid. Choose the coarsest grid that still represents the rhythm you intended. A fine grid is useful for genuinely short notes, but it can turn small performance inaccuracies into distracting written detail. Rebuild the preview after changing the setting; the visible score is not updated merely by moving the selector.
Compare the same familiar bar at two settings. If a quick pair merges into one onset, try a finer grid. If a held note is surrounded by tiny unwanted events, compare a coarser grid and inspect the original performance. The right choice depends on the rhythm, not on which option produces the largest number of printed notes.
| Source rhythm | Try first | Check the result |
|---|---|---|
| Notes intended on whole beats | Quarter notes | Short off-beat events may merge |
| Even eighth notes or simple syncopation | Eighth notes | Check rests and off-beat starts |
| A real sixteenth-note figure | Sixteenth notes | Separate intended detail from timing noise |
Check notes and rests in a known passage
Imagine a track containing C4 on beat one, E4 on beat two and G4 on beat four. On a suitable quarter-note grid, the empty third beat should appear as a rest between E and G. Count the bar while listening to the source, then inspect both the notes and the silence in the preview. Rests are part of the musical phrase.
Now imagine C4 and E4 begin together on beat one. The melody draft chooses E4 because it is the higher simultaneous pitch. This explains why a converted chord can look like a single note. When reviewing a real file, check several known moments like these before assuming the whole track has been represented as you intended.
Review meter, tempo and sustained notes
The converter uses an initial supported meter of 4/4, 3/4, 2/4 or 6/8; an unsupported initial signature falls back to 4/4. It uses the initial tempo, constrained to the supported playback range, rather than reproducing an expressive tempo map. The notation starts with C as its displayed key and uses accidentals for other pitches, so source key-signature presentation is not retained.
Long notes can be split at measure boundaries without ties. That changes the written articulation and may produce repeated attacks in playback. Pedal behaviour, drum notation and independent voices are outside the draft’s scope. Check pitch spelling, bar placement, sustain and instrument range. For a detailed arrangement, export MusicXML from the source notation application whenever that option is available.
Choose MusicXML, project JSON or print output
Hear preview plays the simplified melody, helping you compare its contour and rhythm with the source. Download MusicXML when you want to open the result in a notation program. The editable project download can be opened by the homepage editor for its supported single-staff workflow. Print / PDF opens the browser’s print dialog for a paper copy or saved PDF.
A teacher can use a short original MIDI melody as a discussion exercise: ask learners what the conversion retained and what they would rewrite. A student can use the preview to inspect note events, then correct a readable score elsewhere. Save both the original MIDI and the output so that later editing does not depend on an open browser tab.
MIDI to Sheet Music: frequently asked questions
Does this convert recordings or YouTube audio?
No. It reads encoded MIDI note events, not audio. MP3, WAV and video recordings require a different recognition process. The site does not provide audio transcription, and a MIDI file created elsewhere can still need musical cleanup.
Why did some notes from a chord disappear?
The draft is one melodic voice. It selects the highest pitch at a shared quantized onset and can simplify overlaps. Choose an isolated melody track for a closer match, or use a full notation application for polyphonic parts.
Can I change the result after conversion?
Yes. Download MusicXML for a compatible notation editor, or an editable project for the supported homepage editor. Review the musical assumptions first. Printing a draft does not make its quantization or accidental spelling authoritative.